Battery · Lithium Battery
Deye SE-G5.1
Deye 5.12 kWh lithium iron phosphate battery for residential solar energy storage.
Specifications
| Weight | Approximately 44 kg |
|---|---|
| IP Rating | IP20 |
| Cycle Life | ≥6000 cycles at 25℃ (0.2C charge/discharge, 80% DoD) |
| Scalability | Up to 64 units in parallel (327 kWh) |
| Nominal Energy | 5.12 kWh |
| Nominal Voltage | 51.2 V |
| Nominal Capacity | 100 Ah |
| Battery Chemistry | Lithium Iron Phosphate (LiFePO4) |
| Cell Configuration | 1P16S |
| Max Charge Current | 50 A (Continuous), 100 A (Peak for 10 sec) |
| Communication Ports | CAN2.0, RS485 |
| Storage Temperature | 0 to 35℃ |
| Installation Methods | Floor-mounted (stacked), wall-mounted, rack-mounted |
| Max Discharge Current | 50 A (Continuous), 100 A (Peak for 10 sec) |
| Operating Temperature | Charging: 0 to 55℃; Discharge: -20 to 55℃ |
| Dimensions (W x D x H) | 440 × 540 × 133 mm |
| Operating Voltage Range | 44.8 V – 57.6 V |
| Recommended Depth of Discharge | 80% DoD |
How to read this record
- Nominal energy is not usable energy. Apply the depth of discharge and efficiency before comparing runtime.
- Charge current must stay inside what the BMS and the inverter can deliver. A large bank can still be limited by a small charger.
- Confirm the BMS communication protocol (CAN or RS485) matches the inverter before specifying a lithium bank.
Datasheet and manual
No datasheet has been attached yet. Ask the Mishka team for the current document before specifying this model.
Check it fits your design
Specifications change with revisions and firmware. Confirm the exact model with the manufacturer, then check the battery voltage, charge current, MPPT window and communication protocol against the rest of the system.
More specifications
Record last updated 19 October 2026. Confirm the model revision with the manufacturer before ordering.
Back to the product spec database